top of page
NewBrinellTop

The Brinell hardness test was developed by Dr. A J Brinell around 1905. Using a common test load of either 500 kgf, 1000 kgf, 1500 kgf or 3000 kgf along with various size balls, an impression is made. Due to the high loads and relatively large size of the impression, minimal surface prep is require.  Typically a Brinell test is done on cast parts prior to machining. The impression is measured optically using a Brinell scope and written as HB.

Model:

Manufacturer:

Type:

Vertical Capacity:

Throat Depth:

Weight:

DTLC-3000

Clark

Load Cell Brinell Hardness Tester

5 Inches

9.5 Inches

285 lbs

Spec:

E-10

Model:

Manufacturer:

Type:

Vertical Capacity:

Throat Depth:

Weight:

King Brinell

King

Portable Brinell Hardness Tester

4 or 6 Inches

14 Inches

10 lbs

Spec:

E-110

Model:

Manufacturer:

Type:

Vertical Capacity:

Throat Depth:

Weight:

NB3010

Newage Hardness Testing

Semi Automatic Brinell Tester

4.5 Inches

9 Inches

500 lbs

Spec:

E-10

Model:

Manufacturer:

Type:

Vertical Capacity:

Throat Depth:

Weight:

9000N

Newage Hardness Testing

Automatic Brinell Tester

N/A

Up to 36 Inches

500 lbs

Spec:

E-10

Model:

7000

Manufacturer:

Type:

Vertical Capacity:

Throat Depth:

Weight:

Spec:

Newage Hardness Testing

Semi Automatic Brinell Tester

Up to 16 Inches

8 Inches

500 lbs

E-10

Model:

PH Series

Manufacturer:

Clark

Type:

Brinell Tester

Vertical Capacity:

12, 18, or 34 Inches

Throat Depth:

6, 9, or 12 Inches

Weight:

850, 1000, or 1200 lbs

Spec:

E-10

Model:

Manufacturer:

Type:

Vertical Capacity:

Throat Depth:

Weight:

PHL Series

Clark

Semi Automatic Brinell Tester

9 or 12 Inches

18 or 34 Inches

1200 or 2600 lbs

Spec:

E-10

bottom of page